Front

REPLACEMENT
1. Lift up vehicle and remove front wheels





2. Remove stabilizer link





3. Remove right ABS sensor clamp.





4. Remove right brake hose clamp





5. Place alignment mark on stabilizer and stabilizer lever. and remove both parts.





6. Remove stabilizer bushing.
7. Remove stabilizer from right side of vehicle. Be careful not to damage ABS sensor harness and brake piping.
8. To install, reverse above removal procedures.





a. Be sure to align paint mark on stabilizer with bushing during installation.





b. Do not confuse front side of clamp with rear side during installation.
c. Be sure to align alignment mark when installing stabilizer lever and stabilizer.

INSPECTION
1. Check bushing for cracks, fatigue or damage.
2. Check links for deformities, cracks, or damage, and bushing for protrusions beyond clamp.