Fuel Pump: Service and Repair
REMOVAL1. Release fuel pressure.
2. Disconnect fuel delivery hose (1) and return hose (2).
3. Remove nuts which install fuel pump onto fuel tank.
4. Take off fuel pump from fuel tank.
INSTALLATION
Installation is in the reverse order of removal. Observe the following:
1. Always use new gaskets.
2. Ensure sealing portion is free from fuel or foreign particles before installation.
3. Tighten nuts in numerical sequence shown in Figure to specified torque.
Tightening torque:
3 - 6 N.m (0.3 - 0.6 kg.m, 2.2 - 4.3 ft.lb)