Air Bag: Service and Repair

Airbag Module

REMOVAL

1. Set front wheels in straight ahead position.
2. Turn ignition switch off.
3. Disconnect ground cable from battery and wait for at least 20 seconds before starting work.




4. Remove covers from both sides of steering wheel. Using T30 TORX� bit (Tamper resistant type), remove 4 TORX� bolts.




5. Disconnect airbag and horn connectors on back of airbag module.
6. Refer to "Precaution" for handling of a removed airbag module.

INSTALLATION
Installation is in reverse order of removal procedures.
Observe the following: Make sure that ignition switch is off.

CAUTION: Do not allow harness and connectors to interfere or get caught with other parts.