Fuel Filter: Service and Repair

RELEASE FUEL PRESSURE
1. Remove fuel pump fuse.
2. Start the engine and run it until it stalls.
3. After the engine stalls, crank it for five (5) more seconds.
4. Turn the key "OFF".
5. Reinstall fuel pump fuse.

REMOVAL

Fuel Filter Fasteners:

1. Remove fuel filter fasteners.
2. Using needle-nose locking pliers to clamp fuel delivery hose (to prevent fuel spilage).
3. Remove hose clamps and hoses.
4. Remove filter.


INSTALLATION

1. Inspect hoses for cracks or damage. Replace if necessary.
2. Inspect clamps for deformation or damage. Replace if necessary.
3. Tighten hose clamps.

HOSE CLAMP TORQUE VALUE
1.0-1.5 Nm (0.7-1.1 ft.lbs.)

4. Place filter in bracket, making sure hoses are not twisted or kinked.
5. Install bracket fasteners.
6. Start engine and assure there are no leaks.