Connecting Rod Bearing

Crankshaft:
Standard Diameter:
Main Bearing [01]
Crank Pin 1.7715-1.7720

Out Of Round All 0.0012
Taper All 0.0028

Bearing Clearance:
Main Bearings [02]
Connecting Rod Bearings .0004-.0021
Thrust Bearing Clearance .0004-.0037

Connecting Rods:
Pin Bore Diameter 1.8898-1.8905
Side Clearance .0028-.0130

[01] -- Front, 2.1637-2.1642 inch; center, 2.1635-2.1642 inch; rear, 2.1624-2.1630 inch.
[02] -- Center, .0003-.0011 inch; front & rear, .0001-.0014 inch.