Transmission Control Systems

DTC 32 Vehicle Speed Sensor 1:

Vehicle Speed Sensor 1 Circuit:

1. MEASURE SIGNAL VOLTAGE INPUT OF TCU.
a. Raise vehicle and place safety stands.
On AWD models, raise all wheels off floor.
b. Start the engine. Set vehicle in 12 miles/h condition.
c. Measure signal voltage input of TCU.

Connector & Terminal/Specified value
(B67) No. 12 - (B66) No. 20 / AC 1 V, min.

2. CHECK HARNESS/CONNECTOR BETWEEN TCU AND VEHICLE SPEED SENSOR 1.
a. Disconnect connector from TCU.
b. Disconnect connector from transmission.

c. Measure resistance between TCU connector and transmission connector.

Connector & Terminal/Specified value
(B67) No. 12 - (B14) No. 16/0 ohms
(B67) No. 12 - Body /1 Mohms min.
(B66) No. 20 - (B14) No. 9/0 ohms
(B66) No. 20 - Body /1 Mohms min.

3. CHECK VEHICLE SPEED SENSOR 1.
a. Disconnect connector from transmission.
b. Measure resistance between transmission connector receptacle's terminals.

Connector & Terminal/Specified value
(T2) No 16 - No. 9/450 - 650 ohms