Tail Lamp: Service and Repair

REMOVAL AND INSTALLATION

REAR COMBINATION LIGHT




1. Remove rear trim.
2. Remove nuts and disconnect connector.

Tightening torque: 6 - 7 N.m (0.6 - 0.7 kg.m, 4.3 - 5.1 ft.lb)

3. Attach adhesive cloth tape to body area around rear combination light.
4. Using a standard screwdriver, carefully pry rear combination light off and away from the front of vehicle.

CAUTION:
- Do not pry rear combination light forcefully as this may scratch vehicle body.
- Remove all traces of adhesive tape from body before installation.
- Attach butyl rubber tape to back of rear combination light before installing rear combination light on body for sealing purposes.