Dome Lamp: Service and Repair

Room Light and Door Switch

REMOVAL AND INSTALLATION

1. ROOM LIGHT




1. Pry room light lens off using a screwdriver.
2. Remove screws which secure room light body.
3. Remove room light body while disconnecting connector.

2. TRUNK ROOM LIGHT (SEDAN)




1. Turn trunk room light body by hand and remove it from rear shelf panel.
2. Disconnect connector of trunk room light.

3. LUGGAGE ROOM LIGHT (WAGON)




1. Pry luggage room light lens off using a screwdriver.
2. Remove screws which secure luggage room light body.
3. Remove luggage room light body while disconnecting connector.

4. DOOR SWITCH




1. Remove rubber boot of door switch.
2. Remove screw which secures door switch to body.
3. Remove door switch while disconnecting connector.

5. TRUNK ROOM LIGHT SWITCH (SEDAN)
Refer to Appropriate procedures for removal and installation of trunk room light switch which is installed in trunk lid lock.

6. LUGGAGE ROOM LIGHT SWITCH (WAGON)
Refer to removal and installation of luggage room light switch which is installed in rear gate lock.