Installation
INSTALLATIONCAUTION: Replace gaskets with new ones.
1) Install front catalytic converter to front exhaust pipe.
Tightening torque:
30 ± 5 Nm (3.1 ± 0.5 kg-m, 22.4 ± 3.6 ft-Ib)
2) Install front exhaust pipe and center exhaust pipe. And temporarily tighten bolt which installs center exhaust pipe to hanger bracket.
3) Tighten bolts which hold front exhaust pipe onto cylinder heads.
Tightening torque:
30 ± 5 Nm (3.1 ± 0.5 kg-m, 22.4 ± 3.6 ft-Ib)
4) Install center exhaust pipe to rear exhaust pipe.
Tightening torque:
18 ± 5 Nm (1.8 ± 0.5 kg-m, 13.0 ± 3.6 ft-Ib)
5) Tighten bolt which holds center exhaust pipe to hanger bracket.
Tightening torque:
35 ± 5 Nm (3.6 ± 0.5 kg-m, 26.0 ± 3.6 ft-Ib)
6) Connect rear oxygen sensor connector.
7) Lower the vehicle.
8) Connect front oxygen sensor connector.