Rear Wheel Toe-In

REAR WHEEL TOE-IN (AWD MODEL)





- Inspection

Toe-in:
0 ± 3 mm (0 ± 0.12 in)

- Adjustment
1) Loosen self-locking nut on inner side of rear lateral link.

CAUTION:
- When loosening or tightening adjusting bolt, hold bolt head and turn self-locking nut.
- Discard loosened self-locking nut and replace with a new one.





2) Turn adjusting bolt head until toe-in and -out are at the middle value of specifications.

NOTE: Movement of one scale graduation changes toe-in by approximately 3 mm (0.12 in).

3) Tighten self-locking nut.

Tightening torque:
98 ± 15 Nm (10 ± 1.5 kg-m, 72 ± 11 ft-Ib.)