Rear Wiper and Washer

Without Intermittent Rear Area:

1. REAR WIPER AND WASHER SWITCH
Set rear wiper and washer switch to each position and check continuity between terminals (indicated in table).

2. WIPER MOTOR




1. Operational check
Connect battery to wiper motor and check operation of wiper motor.




2. Check wiper motor for proper stoppage.
After operating wiper motor, disconnect battery from wiper motor.




3. Reconnect battery and ensure that wiper motor stops at "AUTO STOP" after it has been operated.







3. REAR WIPER RELAY
Connect battery to terminal (1) and ground terminal (2). Check continuity between terminals (indicated in table).