Cruise Control System

DIAGNOSIS:
- Failure or disconnection of inhibitor switch
- Failure or disconnection of clutch switch

TROUBLE SYMPTOM:
- Cruise control cannot be set.




1. CHECK WITH SELECT MONITOR
- Measurement condition: Turn ignition switch ON. Turn cruise main switch ON.
- Operation of function keys: FAD ENT

1. When depressing clutch pedal; LED No.5 goes out lights.
2. When setting shift lever in N position; LED No.5 goes out - lights.




2. CHECK CLUTCH SWITCH (MT MODEL)
1. Check items for the clutch switch. (Circuit test between terminals)

Terminals / Specified resistance:
No.1 - No.2 / 10 Ohm, max. (Without pedal depressing).
/1 MOhm, min. (Pedal depressing).

3. CHECK INHIBITOR SWITCH (AT MODEL)
1. When engine starts in the N position (the starter rotates), N position contact point of the inhibitor is normal.
2. Check the wiring harness.