Front Wiper and Washer
ON-CAR SERVICESADJUSTMENT
1. When wiper switch is in "OFF" position, adjust blades in original position as shown in figure by changing wiper arm installation.
Original position:
A: 15 - 30 mm (0.59 - 1.18 in)
B: 25 - 40 mm (0.98 - 1.57 in)
2. Adjust washer ejecting point on windshield glass as shown in figure when car stops.
Ejecting point:
A: 375 mm (14.76 in)
B: 150 mm (5.91 in)
C: 350 mm (13.78 in)