Front Wiper and Washer

REMOVAL AND INSTALLATION




1. BLADE
Pull out blade from arm while pushing up clip




2. WIPER ARM
1. Open front hood.
2. Remove cap. Remove the nut which secure wiper arm, and remove wiper arm.

Tightening torque: 10 - 18 N.m (1.0 - 1.8 kg.m, 7 - 13 ft.lb)

3. WIPER MOTOR AND LINK
1. Detach weatherstrip and cowl net.

NOTE: Apply silicone oil or soap water to both sides of cowl net to facilitate removal.




2. Disconnect electric connector, and remove motor attaching bolts.

Tightening torque:
4.4 - 7.4 N.m (0.45 - 0.75 kg.m, 3.3 - 5.4 ft.lb)




3. Remove nut securing motor link on the back side of motor.

Tightening torque:
12 - 18 N.m (1.2 - 1.8 kg.m, 9 - 13 ft.lb)




4. Remove nuts which secure sleeve unit.

Tightening torque:
4.4 - 7.4 N.m (0.45 - 0.75 kg.m, 3.3 - 5.4 ft.lb)




5. Remove wiper link from service hole in front panel.