Wiper Motor Linkage: Service and Repair
REMOVAL AND INSTALLATIONWIPER MOTOR AND LINK
1. Detach weatherstrip and cowl net.
NOTE: Apply silicone oil or soap water to both sides of cowl net to facilitate removal.
2. Disconnect electric connector, and remove motor attaching bolts.
Tightening torque:
4.4 - 7.4 N.m (0.45 - 0.75 kg.m, 3.3 - 5.4 ft.lb)
3. Remove nut securing motor link on the back side of motor.
Tightening torque:
12 - 18 N.m (1.2 - 1.8 kg.m, 9 - 13 ft.lb)
4. Remove nuts which secure sleeve unit.
Tightening torque:
4.4 - 7.4 N.m (0.45 - 0.75 kg.m, 3.3 - 5.4 ft.lb)
5. Remove wiper link from service hole in front panel.