Disassembly

FTJ (Free-ring Tripod Joint)





1) Place alignment marks on shaft and outer race.





2) Remove FTJ boot band and boot.

CAUTION: Be careful not to damage boot.





3) Remove circlip from FTJ outer race using screwdriver.
4) Remove FTJ outer race from shaft assembly.
5) Wipe off grease.

CAUTION: The grease is a special grease. Do not confuse with other greases.





6) Place alignment mark on free ring and trunnion.
7) Remove free ring from trunnion.





8) Place alignment mark on trunnion and shaft.





9) Remove snap ring and trunnion.

CAUTION: Be sure to wrap shaft splines with vinyl tape to prevent boot from scratches.

10) Remove FTJ boot.
11) Remove BJ boot band and boot.