A: Removal

REMOVAL

1. INTAKE MANIFOLD
1) Release fuel pressure.
2) Drain engine coolant.
3) Remove intake manifold.
4) Remove engine coolant pipe.





2. CYLINDER HEAD
1) Remove timing belt, camshaft sprocket and related parts.
2) Remove oil level gauge guide attaching boll (left hand only) and oil level gauge guide.

Fig. 38 Cylinder Head Bolt Loosening Sequence:

3) Remove cylinder head bolts in numerical sequence shown in Figure.

CAUTION: Leave bolts (1) and (3) engaged by three or four threads to prevent cylinder head from falling.

4) While tapping cylinder head with a plastic hammer, separate it from cylinder block.
Remove bolts (1) and (3) to remove cylinder head.
5) Remove cylinder head gasket.

CAUTION: Do not scratch the mating surface of cylinder head and cylinder block.

6) Similarly, remove right side cylinder head.