B: Installation
B: INSTALLATIONCAUTION: Replace gaskets with new ones.
1) Install center exhaust pipe and rear catalytic converter assembly.
Temporarily tighten bolt which installs center exhaust pipe to hanger bracket.
2) Install center exhaust pipe to front catalytic converter.
Tightening torque:
35 ± 5 Nm (3.6 ± 0.5 kg-m, 26.0 ± 3.6 ft-Ib.)
3) Install center exhaust pipe to rear exhaust pipe.
Tightening torque:
18 ± 5 Nm (1.8 ± 0.5 kg-m, 13.0 ± 3.6 ft-Ib.)
4) Tighten bolt which holds center exhaust pipe to hanger bracket
Tightening torque:
35 ± 5 Nm (3.6 ± 0.5 kg-m, 26.0 ± 3.6 ft-Ib.)
5) Connect rear oxygen sensor connector. (Except California 2200 cc model)