A: Disassembly

A: DISASSEMBLY

Tightening torque: N.m (kg-m, ft-lb)
T1: 8.4 ± 0.5 (0.65 ± 0.05, 4.7 ± 0.4)
T2: 10 ± 1 (7.0 ± 0.1, 7.2 ± 0.7)
T3: 25 ± 2 (2.5 ± 0.2, 18.1 ± 1.4)

1) Remove rear case (1).
2) Remove plug (2), spring (3) and reverse check ball (4).
3) Remove neutral switch (5).
4) Pull out shifter arm (6).
5) Remove reverse check sleeve (7).

NOTE: The disassembly procedure is the same as for AWD model.





6) Remove back-up light switch (8).
7) Remove oil seal (9).

CAUTION: Do not reuse oil seal.