Checking For Leaks

CHECKING OF COOLING SYSTEM
1) Remove radiator cap, top off radiator, and attach tester to radiator in place of cap.
2) Apply a pressure of 157 kPa (1.6 kg/cm2, 23 psi) to radiator to check if:
(1) Engine coolant leaks at/around radiator.
(2) Engine coolant leaks at/around hoses or connections.

CAUTION:
- Engine should be off.
- Wipe engine coolant from check points in advance.
- Be careful to prevent engine coolant from spurting out when removing tester.
- Be careful also not to deform filler neck of radiator when installing or removing tester.