Hose/Line HVAC: Service and Repair

Flexible Hose

REMOVAL AND INSTALLATION

1. Disconnect battery negative terminal.




2. Discharge refrigerant using refrigerant recovery system.
3. Remove low-pressure hose.




1. Remove hose attaching bolts.

CAUTION: Plug the opening to prevent foreign matter from getting in.

2. Disconnect the connector at evaporator module.

4. Remove high-pressure hose.

1. Disconnect hose attaching bolt (compressor side).
2. Disconnect hose attaching bolt (condenser side).

CAUTION: Plug the opening to prevent foreign matter from getting in.

5. Installation is in the reverse order of removal.
6. Charge refrigerant.