Diagnostic Procedure: Engine Hood Switch Signal

Step 1 - 2:

H : DIAGNOSTICS PROCEDURE FOR ENGINE HOOD SWITCH SIGNAL

1. CHECK ENGINE HOOD SWITCH INPUT SIGNAL FOR SECURITY CONTROL MODULE.




1. Remove security control module without disconnecting connector.
2. Turn engine hood switch ON/OFF and measure voltage between security control module connector and body.

Connector & terminal / Specified voltage:
(B93) No.10 - Body / 10 V, or more (Hood closed) / 1 V, max. (Hood opened)

2. CHECK ENGINE HOOD SWITCH.
Refer to engine hood switch for inspection.