Precautions

B: PRECAUTIONS





1) The following job should be followed before disassembly:
(1) Clean oil, grease, dirt and dust from transmission.
(2) Remove drain plug (1) to drain oil. After draining, retighten it as before.

CAUTION: Replace gasket with a new one.

Tightening torque:
44 ± 3 N.m (4.5 ± 0.3 kg-m, 32.5 ± 2.2 ft-lb)





(3) Attach transmission to ST. ST 499937100 TRANSMISSION STAND SET

2) Rotating parts should be coated with oil prior to assembly.
3) All disassembled parts, if to be reused, should be reinstalled in the original positions and directions.
4) Gaskets and lock washers must be replaced with new ones.
5) Liquid gasket should be used where specified to prevent leakage.
6) Fill transmission gear oil through the oil level gauge hole up to upper point level gauge.