Operation CHARM: Car repair manuals for everyone.

Lighting and Horns: Service and Repair

1. Remove air bag module as outlined under Air Bag.
2. Disconnect negative battery cable.
3. Raise and support vehicle, then remove front wheels.
4. Remove steering shaft universal joint, then the lower instrument panel trim panel.
5. Disconnect electrical connectors for ignition switch and combination switch.
6. Remove two steering shaft to instrument panel retaining bolts.
7. Pull steering shaft out from toe board.
8. On models less air bags, remove horn pad.
9. Remove steering wheel as outlined under Steering Wheel.
10. Remove steering column upper and lower covers, then two combination switch mounting bolts.
11. Remove combination switch.
12. Reverse procedure to install.

Fig. 3 Aligning Tool Connector. Legacy & SVX w/Airbag:




13. On models with air bags, align center of roll connector, Fig. 5.