Restraint Systems

TROUBLE CODE 14





FLOWCHART

DIAGNOSIS:
- (AB9) and (AB1O) are not connected properly.
- (AB2) and (AB7) are not connected properly.
- (AB3) and (AE8) are not connected properly.
- (AB4), (AB5) and (AB6) are not connected properly to airbag control module.

CAUTION: Before performing diagnostics on airbag system, turn ignition switch "OFF", disconnect battery ground cable and then wait at least 20 seconds.

1. DOUBLE LOCK INSPECTION FOR CONNECTORS (AB9) AND (AB1O)

1) Remove glove box.





2) Check double lock of connectors (AB9) and (AB1O).

2. AIRBAG CONTROL MODULE DOUBLE LOCK INSPECTION AT CONNECTORS (AB4) (AB5) (AB6)





1) Check double lock of connectors (AB4) (AB5) (AB6) connected to airbag control module.

3. DOUBLE LOCK INSPECTION FOR CONNECTORS (AB3) AND (AB8)

1) Remove lower cover panel.





2) Check double lock of connectors (AB3) and (AB8) below steering column.

4. ROLL CONNECTOR DOUBLE LOCK INSPECTION AT CONNECTORS (AB2) AND (AB7)





1) Remove airbag module and check double lock of connectors (AB2) and (AB7) at roll connector.