Replacement

REMOVAL
1. Drain engine oil.
- Set container under the vehicle, and remove drain plug from oil pan.





2. Drain coolant.
- Set container under the vehicle, and remove drain cock from radiator.





3. Remove belt covers, timing belt and related parts.





4. Remove belt tensioner bracket.
5. Remove left-hand camshaft sprocket and left-hand belt cover No. 2.





6. Remove water pump.





7. Remove oil pump by using flat-bladed screwdriver.

CAUTION: Be careful not to scratch mating surfaces of cylinder block and oil pump.





INSTALLATION
Installation is in the reverse order of removal. Observe the following:
1. Apply fluid packing, THREE BOND 1215 or equivalent to matching surfaces of oil pump.
2. Replace O-ring with a new one.
3. Be careful not to scratch oil seal when installing oil pump on cylinder block.

CAUTION: Apply fluid packing, THREE BOND 1215 or equivalent to oil pressure switch threads before installation.