Output Shaft: Service and Repair

DISASSEMBLY





1. Take out the seal rings.

CAUTION: Be careful not to damage the seal rings.





2. Take out the snap ring (outer (1)).

CAUTION: Be careful not to damage the splines.





3. Using a press, remove the reduction drive gear.





4. Using a press, remove the ball bearing.

INSPECTION
Make sure that each component is free of harmful gouges, cuts, or dust.

ASSEMBLY




1. Press-fit the ball bearing and reduction drive gear to the shaft.





2. Fit the snap ring (1) securely in the snap ring groove on the shaft (2).





3. Attach two seal rings.

NOTE: To make subsequent assembly easier, apply Vaseline to the grooves of the shaft and to the exterior of the seal ring.