Headlamp: Service and Repair

HEADLIGHT AND SIDE MARKER LIGHT




1. Remove front grille and disconnect connector from headlight.
2. Remove screws which secure side marker light.
3. Remove side marker light while disconnecting connector.




4. Remove screws and bolts which secure headlight and remove headlight.

Tightening torque:
6.4 ± 0.5 N.m (0.65 ± 0.05 kg-m, 4.7 ± 0.4 ft-lb)

5. Installation is in the reverse order of removal.

NOTE: When installing, securely fit clip (on fender side) into locating (on side marker light side).