Tail Lamp: Service and Repair

REAR COMBINATION LIGHT




1. Remove rear trim.
2. Remove nuts and disconnect connector.

Tightening torque:
6.4 ± 0.5 N.m (0.65 ± 0.05 kg-m, 4.7 ± 0.4 ft-lb)

3. Attach adhesive cloth tape to body area around rear combination light.
4. Using a standard screwdriver, carefully pry rear combination light off and away from the front of vehicle.
5. Installation is in the reverse order of removal.

CAUTION:
- Do not pry rear combination light forcefully as this may 9cratch vehicle body.
- Remove all traces of adhesive tape from body before installation.
- Attach butyl rubber tape to back of rear combination light before installing rear combination light on body for sealing purposes.