Test 10Y1

TEST 10Y1: CHECK BATTERY SHORT OF HARNESS
1) Turn ignition switch to OFF.
2) Disconnect two connectors from Automatic Transmission (AT) control module.
3) Disconnect connector from ABS Control Module (ABSCM).
4) Turn ignition switch to ON.
5) Measure voltage between ABSCM connector and chassis ground.
Connector & terminal: (F49) No. 12 (+) & Chassis ground (-)
CHECK: Is voltage 0 Volt?
YES: Test 10Y2
NO: Repair harness between AT control module and ABSCM.