Test 10Y3

TEST 10Y3: CHECK OPEN CIRCUIT OF HARNESS
1) Connect all connectors to Transmission Control Module (TCM).
2) Turn ignition switch to ON.
3) Measure voltage between ABS Control Module (ABSCM) connector and chassis ground.
Connector & terminal:
(F49) No. 12 (+) & Chassis ground (-)
(F49) No. 39 (+) & Chassis ground (-)
CHECK: Is the voltage between 10 and 13 Volts?
YES: Test 10Y4
NO: Repair harness/connector between TCM and ABSCM.