Test 10AB23

TEST 10AB23: CHECK INLET SOLENOID VALVE RESISTANCE
1) Disconnect connector from hydraulic unit.
2) Measure resistance between hydraulic unit connector terminals.
Connector & terminal:
(F9) No. 4 & (ABS1) No. 2
(F9) No. 1 & (ABS1) No. 2
(F9) No. 2 & (ABS1) No. 2
(F9) No. 3 & (ABS1) No. 2
CHECK: Is the resistance between 7.8 and 9.2 ohms?
YES: Test 10AB24
NO: Replace hydraulic unit.