Test 10AB27

TEST 10AB27: CHECK HARNESS BETWEEN ABSCM AND HYDRAULIC UNIT
1) Connect connector to hydraulic unit.
2) Measure resistance between ABS Control Module (ABSCM) connector terminals.
Connector & terminal:
(F49) No. 30 & No. 1
(F49) No. 24 & No. 1
(F49) No. 23 & No. 1
(F49) No. 31 & No. 1
CHECK: Is the resistance between 8.3 and 9.7 ohms?
YES: Test 10AB28
NO: Repair harness/connector between hydraulic unit and ABSCM.