Test 10AB32

TEST 10AB32: CHECK BATTERY SHORT OF SOLENOID VALVE
1) Turn ignition switch to OFF.
2) Disconnect connectors (ABS1, F9) from hydraulic unit.
3) Disconnect connector from ABS Control Module (ABSCM).
4) Turn ignition switch to ON.
5) Measure voltage between hydraulic unit connector and chassis ground.
Connector & terminal: (F9) No. 4 (+) & Chassis ground (-)
CHECK: Is voltage 0 Volt?
YES: Test 10AB33
NO: Replace hydraulic unit, and check all fuses.