Installation

INSTALLATION

1) Install ABSCM&H/U.

CAUTION: Confirm that the specifications of the ABSCM&H/U conforms to the vehicle specifications.

Tightening torque:
18 ± 5 Nm (1.8 ± 0.5 kg-m, 13.0 ± 3.6 ft-Ib)

2) Connect brake pipes to their correct ABSCM&H/C connections.
3) Using cable clip, secure ABSCM&H/U harness to bracket.
4) Connect connector to ABSCM&H/U.

CAUTION:
- Be sure to remove all foreign mailer from inside the connector before connecting.
- Ensure that the ABSCM&H/C connector is securely locked.

5) Install air intake duct.
6) Connect ground cable to battery.
7) Bleed air from the brake system.