Diagnostic Procedure: Door Lock/Unlock Switch Signal

Step 1 - 2:

J : DIAGNOSTICS PROCEDURE FOR DOOR LOCK/UNLOCK SWITCH SIGNAL

1. CHECK DOOR LOCK/UNLOCK SWITCH INPUT SIGNAL FOR SECURITY CONTROL MODULE.




1. Remove security control module without disconnecting connector.
2. Close all the doors and rear gate (WAGON), and lock with ignition key.
3. Measure voltage between security control module connector and body.

Connector & terminal / Specified voltage:
(B93) No.1 - Body / 10 V, or more

NOTE: When one of the door (driver, passenger or rear gate) lock knobs is in unlocked position, the voltage may be 1 V, max.

4. Unlock the door with ignition key.
5. Measure voltage between security control module connector and body.

Connector & terminal / Specified voltage:
(B93) No.1 - Body / 1 V, max.

2. CHECK DOOR LOCK/UNLOCK SWITCH.
Refer to door lock/unlock switch for inspection.