Rear Seat

REMOVAL




1. Remove bolts securing hinges (located at front of seat) to body.
2. Pull strap (located in middle rear portion of cushion) to release lock. Lift cushion out and away from body.
3. Pull knobs (located at each side of backrest's upper portion) up to release lock, and fold backrest all the way forward.




4. Remove the bolt (1) and then remove backrest. (LH side)
5. Remove the bolt (2) and then remove backrest (RH side) from hinge bracket (3).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Do not allow center seat belt to get under cushion when folding cushion.
- Ensure that side seat belt tongue is free from cushion and trim panel.
- Lift front of cushion to ensure that cushion is properly locked.