On-Car Service

ON-CAR SERVICE





Clutch Pedal (2500 cc model)
1) Push release fork until operating cylinder push rod retracts. Check that clutch fluid level in reservoir tank increases.
2) If clutch fluid level increases, hydraulic clutch play is correct.
3) If clutch fluid level does not increase or push rod does not retract, clutch pedal must be adjusted.
4) Check the fluid level on the outside of the clutch master cylinder tank. It the level is below "MIN", add clutch fluid to bring it up to "MAX".

Recommended clutch fluid:
FMVSS No.116, fresh DOT 3 or DOT 4 brake fluid