Removal

REMOVAL
Brake And Clutch Pedal (2500 cc model)
1) Remove steering bolts.
2) Raise vehicle on hoist and remove the two bolts which secure steering unit to underside of body.
3) Lower vehicle to floor.
4) Remove instrument panel lower cover from instrument panel.
5) Disconnect the following parts from pedal bracket.
- Operating rod of brake booster
- Electrical connectors (for stop light switch, etc.)
6) Remove clevis pin which secures lever to push rod.
7) Remove nut which secures clutch master cylinder.
8) Remove steering assembly.
9) Remove bolts and nuts which secure brake and clutch pedals, and remove pedal assembly.