Radiator Cooling Fan Motor: Service and Repair

A: REMOVAL





1) Disconnect ground cable from battery terminal.
2) Disconnect connector of fan motor.





3) Remove reservoir tank.





4) Remove four bolts holding shroud to radiator.





5) Remove radiator fan motor assembly.
6) Remove fan motor from shroud.


B: INSTALLATION
Installation is in the reverse order of removal procedures.
Do the following:
1) Before installing radiator fan motor, apply a coat of sealant to threads and tighten nuts.
2) Make sure radiator fan does not come into contact with shroud when installed.
3) After installation, make sure there is no unusual noise or vibration when fan is rotated.