8. Valve Lifter

8. VALVE LIFTER





1) Check valve lifter for scratch or uneven wear.
2) Measure outer diameter of valve lifter.

Outer diameter:
32.959-32.975 mm (1.2976-1.2982)





3) Measure inner diameter of valve lifter mating part on cylinder head.

Inner diameter:
32.994-33.016 mm (1.2990-1.2998 in)

CAUTION: If difference between outer diameter of valve lifter and inner diameter of valve lifter mating part is over the limit, replace cylinder head.

Standard:
0.019-0.057 mm (0.0007-0.0022 in)

Limit:
0.100 mm (0.0039 in)