Checking Speed Sensors

INSPECTION
1. ABS Sensor.
1) Check pole piece of ABS sensor for foreign particles or damage. If necessary, clean pole piece or replace ABS sensor.








2) Measure ABS sensor resistance.

CAUTION: If resistance is outside the standard value, replace ABS sensor with new one.

NOTE: Check ABS sensor cable for discontinuity. If necessary, replace with a new one.

2. Output Voltage.





Output voltage can be checked by the following method. Install resistor and condenser, then rotate wheel about 2.75 km/h (2 MPH) or equivalent.

NOTE: Regarding terminal No., please refer to item 1. ABS SENSOR.