Front Wiper and Washer

1. COMBINATION SWITCH (ON-CAR)
1. Remove instrument panel lower cover.
2. Remove lower column cover.
3. Unfasten holddown clip which secures harness, and disconnect connectors from body harness.

Wiper Switch:

Washer Switch:

4. Set wiper switch to each position and check continuity between terminals as indicated in table:

2. WIPER MOTOR




1. Check wiper motor operation at low speed.
Connect battery to wiper motor. Check wiper motor for proper operation at low speed.




2. Check wiper motor operation at high speed. Connect battery to wiper motor. Check wiper motor for proper operation at high speed.




3. Check wiper motor for proper stoppage. Connect battery to wiper motor. After operating wiper motor at low speed, disconnect battery to stop it.




4. Reconnect battery and ensure that wiper motor stops at "AUTO STOP" after operating at low speed.




3. WASHER MOTOR
Apply battery voltage between terminals of washer motor connector and check that washer motor operates.