Diagnostic Procedure: Door Switch Signal

Step 1 - 2:

G : DIAGNOSTICS PROCEDURE FOR DOOR SWITCH SIGNAL

1. CHECK DOOR SWITCH INPUT SIGNAL FOR SECURITY CONTROL MODULE.




1. Remove security control module without disconnecting connector.
2. Turn door switch ON/OFF and measure voltage between security control module connector and body.

Connector & terminal / Specified voltage:
(B93) No.4 - Body / 10 V, or more (Door closed) / 1 V, max. (Door opened)

NOTE: When one of the doors is open, the voltage may be 1 V, max.

2. CHECK DOOR SWITCH.
Refer to door switch for inspection.

NOTE: The door switch is used for interior light also.