A/T - Remanufactured Automatic Transaxle Program
NUMBER: 16-63-99RDATE: 08/05/00
*REVISED: 12/12/12*
APPLICABILITY:
1990-2012MY All Models with Automatic Transmission
SUBJECT:
Remanufactured Automatic Transaxle Program
INTRODUCTION
Subaru of America, Inc. has extended the availability of remanufactured automatic transmissions to include most Subaru models starting from 1990MY vehicles. This includes most 4EAT, 4DAT and 5AT transmissions. Please check applications and availability through normal parts channels prior to making vehicle repairs. A remanufactured transmission must be used for all repairs reimbursed by Subaru requiring a transmission overhaul or replacement. Only the following repairs to the vehicle�s original transmission may be performed:
^ External electrical components.
^ Transmission wiring harness.
^ External oil leaks.
^ Converter case and internal components (Front Differential).
^ Transfer case, transfer clutches, and solenoid assembly. Including the new VTD system.
^ Torque converter as long as it is not an internal failure that has contaminated the fluid.
^ Control Valve Body replacement (4DAT and 5AT only) as long as an internal failure has not contaminated the fluid.
^ Control Valve Body Electrical Components (4EAT only).
^ Mechanical shifter and parking system components.
Note:
If the repair estimate (parts and labor) to repair one or more of the above items exceeds 90% of the remanufactured transmission repair cost (parts and labor), then a remanufactured transmission should be used. Full details are available in the CDS Policies and Procedures Manual section 8.4.33.1.
Remanufactured transmissions may not be used to repair new in-stock vehicles. To ensure full core credit, dealers should follow all instructions listed on the Subaru Transmission Core Return Procedures and fill out the documentation completely using the online core return system. Keep a copy of the Credit Request and Diagnosis Form with the vehicle records. All transmissions replaced with a remanufactured transmission (warranty or non-warranty) are returned to SUBARU OF AMERICA, Inc. at the Grove City, OH address outlined in the document package. All other OE transmissions replaced under warranty must be shipped to the location indicated on the warranty parts return notice. Transmissions incorrectly shipped will result in the dealer not receiving the core credit or a debit of the claim for a part not returned as requested. The dealer will be responsible for tracing and returning the unit to the correct location at their own expense.
The same repairs as those of an original equipment transmission can be performed on a remanufactured transmission, but require District Parts and Service Manager's prior authorization.
Each remanufactured transmission will have a tag attached explaining the installation procedures and precautions. These procedures must be followed otherwise non-warranty failures could occur. The cooler flushing procedure can be found in Subaru Service Bulletin 16-42-90.
Depending on model and model year of vehicle, learning procedures may be required. Please refer to Subaru Service bulletin 16-72-07 for details. Failure to perform the learning procedures could result in customer drivability complaints.
*Shipping Precaution:*
Disclaimer