D: Assembly

ASSEMBLY
1) Install plug (cylinder head LH) by using ST. ST 499587100 OIL SEAL INSTALLER
2) Installation of valve spring and valve
(1) Place cylinder head on ST. ST 498267200 CYLINDER HEAD TABLE
(2) Coat stem of each valve with engine oil and insert valve into valve guide.

CAUTION: When inserting valve into valve guide, use special care not to damage the oil seal lip.





(3) Install valve spring and retainer.

CAUTION: Be sure to install the valve springs with their close-coiled end facing the seat on the cylinder head.

(4) Set ST on valve spring. ST 499718000 VALVE SPRING REMOVER
(5) Compress valve spring and fit valve spring retainer key.





(6) After installing, tap valve spring retainers lightly with wooden hammer for better seating.

3) Install camshaft and support.
4) Install valve rocker assembly.
5) Install rocker cover.