Removal and Installation

REMOVAL
1. Remove knob from gearshift lever.





2. Remove console cover and console boot.





3. Remove rear console box, center console and instrument console.





4. Remove boot plate from the body.





5. Remove the spring between the joint and bracket.





6. Remove stay from bracket.





7. Remove rod from joint.





8. Remove gearshift lever.





9. Remove the exhaust cover and remove cushion rubber from the body.





INSTALLATION
1. Put into gearshift lever from passenger compartment.
2. Mount boot plate on the body.





3. Install rear console box, center console and instrument console.





4. Install console cover and boot.
5. Install gearshift knob.





6. Mount cushion rubber on the body.

Tightening torque:
18 +/- 5 Nm (13.3 +/- 3.7 ft. lbs.).





7. Connect rod to the joint.

Tightening torque:
12 +/- 3 Nm (104 +/- 26 inch lbs.).





8. Connect stay to the bracket.

Tightening torque:
18 +/- 5 Nm (13.3 +/- 3.7 ft. lbs.).

9. Install the exhaust cover.