Crankshaft, Engine

Bend Limit 0.035 mm (0.0014 inch)
Crank Pin and Crank Journal:
Out Of Roundness 0.03 mm (0.0012 inch) Or Less
Taper Limit 0.07 mm (0.0028 inch)
Grinding Limit 0.25 mm (0.0098 inch)
Crank Pin Outer Diameter:
Standard 51.984 - 52.000 mm (2.0466 - 2.4072 inch)
0.03 mm (0.0012 inch):
Undersize 51.954 - 51.970 mm (2.0454 - 2.0461 inch)
0.05 mm (0.0020 inch):
Undersize 51.934 - 51.950 mm (2.0446 - 2.0453 inch)
0.25 mm (0.0098 inch)
Undersize 51.734 - 51.750 mm (2.0368 - 2.0374 inch)
Crankshaft Journal Outer Diameter:

Standard 59.992 - 60.008 mm (2.3619 - 2.3625 inch)
0.03 mm (0.0012 inch):
Undersize 59.962 - 59.978 mm (2.3607 - 2.3613 inch)
0.05 mm (0.0020 inch):
Undersize 59.942 - 59.958 mm (2.3599 - 2.3605 inch)
0.25 mm (0.0098 inch):
Undersize 59.742 - 59.758 mm (2.3520 - 2.3527 inch)
Thrust Clearance:
Standard 0.030 - 0.115 mm (0.0012 - 0.0045 inch)
Limit 0.25 mm (0.0098 inch)
Oil Clearance:
Standard:
No.1, No.3, And No.7 0.005 - 0.035 mm (0.0002 - 0.0014 inch)
No.2, No.4, And No.6 0.013 - 0.038 mm (0.0005 - 0.0015 inch)
No.5 0.013 - 0.034 mm (0.0005 - 0.0013 inch)

Limit:
No.1, No.2, No.6 And No.7 0.045 mm (0.0018 inch)
No.3, No.4, And No.5 0.040 mm (0.0016 inch)