Cruise Control System

DIAGNOSIS:
- Short circuit inside the SET SW and RESUME SW.

TROUBLE SYMPTOM:
- Cruise control cannot be set. (Cancelled immediately.)




1. CHECK SHORT CIRCUIT OF CRUISE CONTROL SUB SWITCH
1. Separate connector of cruise control sub switch.
2. Measure resistance between each terminal of cruise control sub switch.

Terminal / Specified resistance:
SET switch ON No.1 - No.2 / 10 Ohm, max.
RESUME switch ON No.1 - No.3 / 10 Ohm, max.
CANCEL switch ON No.1 - No.2 / 10 Ohm, max
No.1 - No.3 / 10 Ohm, max.