High HC & CO - at High RPM

This condition is indicated by abnormally high carbon monoxide AND hydrocarbon emissions during cruise (2500 rpm).

POSSIBLE CAUSE ACTION

Electrical misfire Check ignition system



Vacuum leak Check vacuum lines and routing in
"Vacuum and Vapor Hose Routing"
in Emissions - Check intake manifold
and vacuum components



Faulty canister purge system Check Evaporative System in
"Testing Procedures" in Emissions



PCV malfunction Check PCV system in "Testing
Procedures" in Emissions



EGR malfunction Check EGR system in "Testing
Procedures" in Emissions



Restricted exhaust Check Catalytic Converter in
"Testing Procedures" in Emissions



Initial timing incorrect Check Ignition Timing in "Adjustment
Procedures" in Emissions



Incorrect Spark Advance Check Spark Controls in
"Fuel Injection and Computers and
Control Systems"



Verify vehicle remains in Refer to "Fuel Injection and
Closed Loop at steady throttle Computers and Control Systems" for
(2500 rpm) and oxygen sensor Self-Diagnostic procedures
operation


Fuel metering malfunction Check fuel pressure
Perform injector balance test
Test regulator operation
(check vacuum line and return hose),
Service Fuel Injectors (pressure clean)